| |
 |
 |
| |
DXE |
| |
 |
Active crossover with equalizer
- Fully balanced signal from head unit to control unit
- Matrix display remote controller for setting output levels, crossover, and configuration
- Front-Rear fader
- Back lit knobs (Blue)
- Dual input
- Five filters with adjustable center frequency
- Selectable input gain
- Microprocessor controlled
- 12/24 high pass output
- Two 12 dB band pass crossovers
- Full range summed center channel
- Summed Sub out with 10 dB of gain (bass Boost)
- Sub Crossover has 12,24,48 dB and full options and 0 or 180 phase switch on sub out
- Highpass,Sub,Bandpass 1&2 are addressable to front or rear Fader outputs
- Low noise NE5532 ICÕs
- Digitally controlled potentiometers and analog switches
|
| |
|
| |
|
|
| |
|
|
| |
|
|
|
| DXE |
| Max input level |
8 volts RMS |
| Input sensitivity |
8V (0dB), 2V (10 dB), 700m(20 dB) |
| Max output level |
10 volts RMS |
| Input impedance |
47.5 K ohm |
| Minimum output impedance |
600 ohms |
| Harmonic distortion + noise |
<.005 |
| Frequency response |
+/- 0.2dB |
| Separation at 1KHz "A" weighted |
>78 dB |
| Signal to Noise "A" weighted |
> 108dB |
| 5 Filters with +/- 15 dB at 20Hz-50Hz with Q of 2,50HZ-100Hz with Q of 1.4,100Hz-1KHz with Q of 1.1,1KHz-10KHz with Q of 1.1,10KHz with Q of 1.1. |
| Current requirements |
1.2 amps |
|
| |
|
| |
ARC DXE
In the future all audio products will have the flexibility of a fully Digital Control System with the sweet smooth sound and perfect sound stage of an Analog Device. This was our goal when we set out to build the DXE. We use an advanced digital controller to operate all the features of a sophisticated Analog Crossover. The result is the channel tracking and frequency control of a fully digital crossover without the harsh mechanical sound that can accrue. For years home audiophiles have enjoyed Hi End Analog Systems that produce stunning sound stages and smooth harmonics. Now the DXE brings this level of performance to the car with the control of a fully digital crossover
This truly Audiophile Crossover is coupled with a 5 Band Parametric Preamp EQ with fully balanced output and a Digital Control. |
| |
|
Home ¦ Products ¦ 
