The HD-FH2014--RCA-CVO plug-and-play wiring kit is the easiest way to integrate a MOTO 720, MOTO 600.4 or KS125.2 Mini to your 2014+ HD Street Glide CVO or 2015+ Road Glide CVO factory radio.
This kit includes a unique bypass harness that allows you to replace the fairing-mounted amplifier in single-amp 2014+ Street Glide and 2015+ Road Glide CVO models. You do not have to remove any of the CVO amplifier factory wiring. Just unplug and remove the OEM amplifier and plug in the bypass harness. Then wire the rest of the wiring kit as usual.
*Please Note: The factory radio in a CVO model is flashed to provide a line-level signal output. If you are connecting directly to a MOTO 720 or KS125.2 Mini amplifier, you will need to set the amplifier’s input switches to “RCA”.
The HD-FH2014-RCA-CVO kit also includes all the other parts needed to install the above amplifiers into your HD CVO model motorcycle including the required pre-loomed, terminated, and fused power wire designed specifically for the power requirements of the amplifier. We engineered a space-saving harness for signal routing that picks up signals at the speaker pods, rather than using a bulky Quad-Lock connector at the back of the radio. In addition, the smallest details were considered down to the single blue butt connector needed for the remote turn-on lead, when connecting your amplifier to the (optional) PSM digital sound processor.
We corrected the “reversed” wiring in the speaker pods without cutting any wires! You have probably read on the forums or watched videos of people advising you to cut the factory speaker wires in the pods to “correct” the polarity. The 2014+ generation of Harley Touring models are known for their “reversed” speaker connectors. While the most of the aftermarket industry (including ARC Audio) makes speakers with a large terminal for the positive(+) wire and a small terminal for the negative(-) wire, Harley does the opposite. Instead of having to cut the wires in the pods, we corrected the polarity in our wiring harness. With our wire kit you just connect the pod speaker wires to the corresponding size speaker terminal and your polarity will be correct.
No Cutting, No Splicing, No soldering. The HD-FH2014-RCA-CVO is as easy as it gets! (No warranties voided!).
Complete wiring and installation kit for integrating ARC Audio MOTO Series amplifiers, KS125.2 Mini amplifier and/or PSM/PSM Pro into 2014+ HD CVO model motorcycles
Color-Coded Plug-and-Play design.
Designed to work with factory radios on Harley Davidson CVO Touring motorcycles.
OEM-style looming and materials used in harness preparation.
HD-FH2014-RCA-CVO wire kit includes:
(1) CVO amplifier bypass harness
(1) pre-loomed, terminated, 100% copper, 8 AWG main power/ground harness with inline fuse
(1) plug-and-play input/output signal integration harness
(1) pre-terminated 18 AWG remote turn-on wire
(1) adhesive-backed 160mm x 110mm hook-and-loop fastener (for mounting amplifier)
(1) blue butt connector for turn-on lead connection (when using the ARC Audio PSM/PSM Pro DSP)
(10) zip ties