_DSC4546_edited.jpg
CX6 Speakers

Description

The CX6 is the latest addition to the Moto series lineup. We've taken everything you loved about the Moto 602v2 and made it even better. With the improved power handling and frequency response, you get a louder, richer sound than ever before.

The CX6 offers a completely redesigned chassis. With a slimmer design and shallower mounting depth, the CX6 will fit a wide array of applications with ease. The new completely sealed front face and floating tweeter design offer even better protection from the elements than ever before. The CX6 boasts increased power handling with 260 watts max, and 110 watts RMS as well as improved frequency response from 50Hz - 20kHz. This means you can enjoy your music just the way you like it, loud and clear.

NOTE: Will not fit with Street Glide or Road Glide Standard factory grills or ARC grills. 

MOTO HD Speakers

Description

The new ARC Audio MOTO602HD is the speaker set of choice for motorcycle and power sports clients that are looking for the most output possible from their audio systems. Designed to offer jaw-dropping efficiency, the new MOTO602HD delivers more output per watt than our amazing MOTO602V2 speakers and almost twice as much as competing products.

The new MOTO602HD speakers are designed from the ground up to make your clients’ H-D audio system sound crystal clear, even when traveling at 65+ miles an hour. The speakers feature carbon fiber reinforced ABS baskets that are a direct bolt-in replacement for 2014 and newer Harley-Davidson Road Glide and Street Glide applications. These speakers fit in the stock locations with no modifications. The ARC Audio transducer engineering team has optimized the performance of the woofers to work flawlessly with the compact speaker enclosures found on these motorcycles or in marine tower-speaker enclosures. Easy-to-use gold-plated 0.11 and 0.25-inch spade terminals on the side of the speaker baskets make installation quick and reliable.

The woofer features an over-sized 1.25-inch heat-resistant Kapton former and an all-copper voice coil winding for impressive power handling. The outer edge of the woofer cone attaches to the basket with a double-roll low-loss spider to ensure amazing clarity at high drive levels while offering clearance for the factory speaker grill on the newer HD motorcycles.

As with all Moto-Series speakers, ARC Audio includes a secondary spider at the base of the woofer cone. This spider seals the prevents water from infiltrating the voice coil gap to ensure reliable operation even when it’s pouring rain (But not going to go as far as saying using a hose directly on the speaker). Along the same lines, the cone materials, surrounds and finishes have passed extensive UV exposure testing to ensure these speakers will look and sound amazing for years to come. The coaxially-located horn-loaded tweeter design offers amazing efficiency and clarity from its titanium dome design. The tweeter is located deep within the magnet and the proprietary design of the horn offers a dramatic increase in system efficiency and optimized directivity to ensure the rider can hear everything clearly.

After you audition the new ARC Audio MOTO602HD 6.5-inch coaxial speaker set the only thing you will be wanting to do is schedule the installation.

 
 
MOTO 6.2 Speakers

Description

The ARC Audio "Moto" Series offers the optimum balance of acoustical harmony and high performance all wrapped up in a single design in a design that caters specifically to the motorcycle environment. Designed by ARC Audio's acoustical engineering division, Moto Series speakers use only today's most advanced and durable acoustical materials and components allowing users a cost-friendly solution that will give any enthusiast an unparalleled musical experience on their motorcycle.

Emphasizing sonic characteristics traditionally found in the finest home and pro audio component systems, Moto Series coaxial and component speaker systems create new levels of musical enjoyment and personalization placing emphasis on enhanced mid-bass and low-frequency response, dynamically engineered midrange for rich, natural and pronounced vocals and instrumentation while efficiently enhancing upper frequencies with finesse and dynamic performance giving you the most value possible that can be heard even at 65+ MPH when stepping up your systems acoustical and performance capabilities.

MOTO Series component systems include air core inducted high-end performance based audiophile quality crossover networks while the Coaxial systems include integrated tweeter crossovers and protection. ARC Audio Moto Speakers are only available from authorized brick and mortars retail locations and exclusively through www.arcaudio.com.

MOTO Series Speakers are available in a broad range of sizes, including 6-1/2" coaxial and 6-1/2" component system configurations.

 
X2 502 Speakers

Description

The new X2 Series speakers from ARC Audio combine multiple new features generated and developed in conjunction with real-world feedback from retailers and consumers to produce a line of OEM standardized direct fit upgrade solutions with amazing sound quality, awesome performance, and incredible value. With nine brand new models, there is an X2 speaker for almost every application.

All X2 Series speakers feature brand new custom-designed, proprietary stamped steel baskets with complete considerations for fitment and end performance in mind. The eight-spoke design includes compound curves to increase rigidity and eliminate resonance for clean sound reproduction and at optimized cutout diameters to allow for perfect fitment into OEM applications. Combined with extensive ventilation beneath the spider mounting ledge the new basket design aids in cooling the voice coil assembly and increases linearity at high power levels and helps improve low-frequency response with minimized rear spider compression form and main moving parts.

The all-new woofer cone design in the X2 Series of speakers uses an injection molded polypropylene construction with stranded glass fiber reinforcement to reduce cone breakup and resonance at high excursion levels offering an optimized musical experience at any listening level. Combined with a specifically designed Butyl rubber surround, the X2 Series speaker line promises years of reliable service in even the most extreme temperature conditions without the breakdown and wear and tear found in traditional surround material designs.

The X2 coaxial speakers feature 20mm silk-dome tweeters with a Y-35 neodymium magnet for excellent efficiency. An integrated phase plug improves off-axis response and dynamic stability at all volumes.

Each set of X2 Coaxial speakers uses high-quality audio grade polypropylene capacitors for the onboard tweeter crossover. These premium caps deliver the improved high-frequency response and a much smoother transition between the tweeter and midrange with predictable, long-term reliability.

The component speakers use the X2 5.2 and X2 6.2 component speakers use the same optimized 27mm tweeter found in the X2 1.0 set. This large tweeter includes a tuned rear chamber to provide smooth and elegant upper midrange response in a robust and durable design that works well with all types of music. The low resonant frequency of the X2 tweeters in the X2 component systems system improves imaging when the tweeters are mounting on the dash, in sail-panels, or A-pillars.

The passive crossover networks included in all X2 component systems include second-order -12 dB/Octave filters to improve imaging and soundstage characteristics. Imaging and staging are improved further with high quality, hand-matched polypropylene capacitors for onboard tweeter crossovers. Just as with the coaxial speakers, poly caps dramatically outperform their electrolytic counterparts regarding performance and reliability.

An important area of focus during the development of the X2 Series was to ensure that these efficient drivers would work well at head unit power levels and when connected to amplifiers like the X2 450.4, The KS300.4, or even the amazing new DSP-equipped PS8-50. Strong magnetic fields, low-mass cones, and balanced compliant suspensions ensure excellent efficiency while large motor assemblies with large-diameter voice coils ensure that physical power handling is under control.

To ensure reliability and long-term performance of every product in the new X2 speaker line, ARC Audio implemented enhanced testing procedures with the ultimate goal of finding and analyzing the failure points of each individual model to improve the overall design individually extending the life of the speaker in a wider range of applications. All of the X2 speakers were tested for power handling using 8 hours of playback using the RS-426A modified pink noise test signal program. After this power test completes successfully, the process was enhanced by doubling the power level after each successful test until we found the true musical failure point of each driver. This process confirms our intention of delivering an extremely durable and thermally reliable speaker design that offers exceptional long-term performance. Consumers can feel confident that they have made a worthwhile investment and retailers needn’t worry about warranty replacements.

When it comes to upgrading factory sound systems, nobody wants the hassle of trying to make an oversized speaker fit in a factory door speaker location. Honda Accords and Civics for example present a challenge for speaker upgrades for some speakers on the market, as the factory cutout size is often a few millimeters smaller than the required cutout diameter of most aftermarket solutions. With an open canvas approach to the X2 Series these potential fitment issues were taken into consideration and even the smallest details such as cutout dimensions without reducing woofer cone diameter and terminal locations were designed into this new and extremely versatile line. The X2 6.2 component set and X2 602 coaxial speakers feature a 141.5mm (5.57-inch) cutout requirement. The speakers are less than 2.4 inches deep. Simply put, our speakers fit where many others don’t.

Furthering our attention to detail for those customers only looking to replace and upgrade their OEM speakers, careful attention was made to the tweeter mounting on the coaxial speakers to ensure that there was minimal protrusion. These minimized mounting dimensions for the tweeters helps to ensure that X2 coaxial speakers fit behind factory grilles with no interference.
The new X2 speaker family includes 5.25 and 6.5-inch two-way component sets, as well as 4, 5.25 and 6.5-inch coaxial sets. OEM-specific oval speaker offerings include 4x6, 5x7 and 6x9 sizes. As mentioned, the 27mm tweeter is available on its own as the X2 1.0. Each set includes a pair of speakers and a pair of crossovers in the component and stand-alone tweeter applications. As we designed these speakers as an upgrade for factory-installed speakers, we don’t include grilles with the speakers. With their combination of performance features, flexible installation considerations and tasteful cosmetics, the new X2 Series speakers are destined to reset the industry benchmark for OEM replacement speaker performance.

 
X2 602 Speakers

Description

The new X2 Series speakers from ARC Audio combine multiple new features generated and developed in conjunction with real-world feedback from retailers and consumers to produce a line of OEM standardized direct fit upgrade solutions with amazing sound quality, awesome performance and incredible value. With nine brand new models, there is an X2 speaker for almost every application.

All X2 Series speakers feature brand new custom designed, proprietary stamped steel baskets with complete considerations for fitment and end performance in mind. The eight-spoke design includes compound curves to increase rigidity and eliminate resonance for clean sound reproduction and at optimized cutout diameters to allow for perfect fitment into OEM applications. Combined with extensive ventilation beneath the spider mounting ledge the new basket design aids in cooling the voice coil assembly and increases linearity at high power levels and helps improve low-frequency response with minimized rear spider compression form and main moving parts.

The all-new woofer cone design in the X2 Series of speakers uses an injection molded polypropylene construction with stranded glass fiber reinforcement to reduce cone breakup and resonance at high excursion levels offering an optimized musical experience at any listening level. Combined with a specifically designed Butyl rubber surround, the X2 Series speaker line promises years of reliable service in even the most extreme temperature conditions without the breakdown and wear and tear found in traditional surround material designs.

The X2 coaxial speakers feature 20mm silk-dome tweeters with a Y-35 neodymium magnet for excellent efficiency. An integrated phase plug improves off-axis response and dynamic stability at all volumes.

Each set of X2 Coaxial speakers uses high-quality audio grade polypropylene capacitors for the onboard tweeter crossover. These premium caps deliver improved high-frequency response and a much smoother transition between the tweeter and midrange with predictable, long-term reliability.

The component speakers use the X2 5.2 and X2 6.2 component speakers use the same optimized 27mm tweeter found in the X2 1.0 set. This large tweeter includes a tuned rear chamber to provide smooth and elegant upper midrange response in a robust and durable design that works well with all types of music. The low resonant frequency of the X2 tweeters in the X2 component systems system improves imaging when the tweeters are mounting on the dash, in sail-panels or A-pillars.

The passive crossover networks included in all X2 component systems include second-order -12 dB/Octave filters to improve imaging and soundstage characteristics. Imaging and staging are improved further with high quality, hand-matched polypropylene capacitors for onboard tweeter crossovers. Just as with the coaxial speakers, poly caps dramatically outperform their electrolytic counterparts regarding performance and reliability.

An important area of focus during the development of the X2 Series was to ensure that these efficient drivers would work well at head unit power levels and when connected to amplifiers like the X2 450.4, The KS300.4 or even the amazing new DSP-equipped PS8-50. Strong magnetic fields, low-mass cones and balanced compliant suspensions ensure excellent efficiency while large motor assemblies with large-diameter voice coils ensure that physical power handling is under control.

To ensure reliability and long-term performance of every product in the new X2 speaker line, ARC Audio implemented enhanced testing procedures with the ultimate goal of finding and analyzing the failure points of each individual model to improve the overall design individually extending the life of the speaker in a wider range of applications. All of the X2 speakers were tested for power handling using 8 hours of playback using the RS-426A modified pink noise test signal program. After this power test completes successfully, the process was enhanced by doubling the power level after each successful test until we found the true musical failure point of each driver. This process confirms our intention of delivering an extremely durable and thermally reliable speaker designs that offers exceptional long-term performance. Consumers can feel confident that they have made a worthwhile investment and retailers needn’t worry about warranty replacements.

When it comes to upgrading factory sound systems, nobody wants the hassle of trying to make an oversized speaker fit in a factory door speaker location. Honda Accords and Civics for example present a challenge for speaker upgrades for some speakers on the market, as the factory cutout size is often a few millimeters smaller than the required cutout diameter of most aftermarket solutions. With an open canvas approach to the X2 Series these potential fitment issues were taken into consideration and even the smallest details such as cutout dimensions without reducing woofer cone diameter and terminal locations were designed into this new and extremely versatile line. The X2 6.2 component set and X2 602 coaxial speakers feature a 141.5mm (5.57-inch) cutout requirement. The speakers are less than 2.4 inches deep. Simply put, our speakers fit where many others don’t.

Furthering our attention to detail for those customers only looking to replace and upgrade their OEM speakers, careful attention was made to the tweeter mounting on the coaxial speakers to ensure that there was minimal protrusion. These minimized mounting dimensions for the tweeters helps to ensure that X2 coaxial speakers fit behind factory grilles with no interference.
The new X2 speaker family includes 5.25 and 6.5-inch two-way component sets, as well as 4, 5.25 and 6.5-inch coaxial sets. OEM-specific oval speaker offerings include 4x6, 5x7 and 6x9 sizes. As mentioned, the 27mm tweeter is available on its own as the X2 1.0. Each set includes a pair of speakers and a pair of crossovers in the component and stand-alone tweeter applications. As we designed these speakers as an upgrade for factory-installed speakers, we don’t include grilles with the speakers. With their combination of performance features, flexible installation considerations and tasteful cosmetics, the new X2 Series speakers are destined to reset the industry benchmark for OEM replacement speaker performance.