Digital Sound Processors, EQ's, OEM Integration
PS8 Pro Digital Sound Processor
The PS8-Pro stand-alone design allows users to adapt this breathtaking DSP technology into most any aftermarket or OEM integrate system with a compact, yet powerful package that is compatible with signals ranging from .5V to 32Vrms via RCA or speaker level connections.
PSM Digital Sound Processor
Compact and powerful the ARC Audio PSM digital sound processor is ARC Audio’s latest creation gives you the power to tailor your systems sound to your own personal style as well as the power to integrate and correct some of today’s more advanced OEM integration based systems in your vehicle or motorcycle.
The PSC is basically a small computer with its own operating system that gives users a wide range of features and options and while small and compact the PSC allows users (after their initial setup) to have near complete control of their system.
LR1 Control Knob
The ARC Audio LR1 DSP level remote control is a simple and easy to use programmable remote level control for select ARC Audio digital sound processors. All of the LR1's control configurations are assignable through your DSP's user interface on your PC.
AXP Wi-Fi Module
The ARC Audio AXP Wi-Fi control accessory module is a simple solution to getting rid of all those pesky cables in your vehicle. The AXP Wi-Fi controller module allows users to connect their Wi-Fi enabled laptop loaded with the Pro-Series DSP Software to any Pro-Series DSP wirelessly.
iData OEM Harness
The ARC Audio IDATA-OEM adapter harness is required to unlock the power of any ARC Audio Pro-Series DSP Equipped products with when using the IDATA MAESTRO "AR" (Amplifier Replacement) Module (Sold Separately) and the I-Data Maestro vehicle specific T-Harness (Sold Separately by I-DATA Maestro).
20' USB A/B Cable
Tired of short USB cables and limited range of connection with your digital sound processors when tuning? The ARC Audio USB-20AB is a single piece 20' continuous USB cable designed to give you the flexibility to be outside of your car or in the driver's seat when tuning regardless of where your DSP is installed.
20' USB Micro Cable
Tired of short USB cables and limited range of connection with your digital sound processors when tuning? The ARC Audio USB-20micro is a single piece 20' continuous USB cable designed to give you the flexibility to be outside of your car or in the driver's seat when tuning regardless of where your DSP is installed.
SRI Signal Summing Module
Today's vehicles are more challenging than ever to integrate aftermarket audio components into these days. Many vehicles don't leave the ability to swap out the factory radio with something more appealing and lets say it, a better sounding solution into its place. This traditionally leaves you with having to integrate your system to the factory speaker leads which in many cases are not full range and are frequency limited to the application of the speakers that were hooked up to them. Don't throw in the towel yet.
Noise Gate Module
The ARC Audio NGM (Noise Gate Module) is a must-have for any High end or OEM integration audio system. Today’s factory audio systems continue to offer more challenges while installing aftermarket audio components into your new Car or Truck.
BXM Bass Enhancement Module
The ARC Audio BXM bass frequency extension module gives you the power to increase the way you hear low frequencies in most any system, especially with those systems where space limitations prevent you from being able to add subwoofers or you're stuck with small speakers due to vehicle design.
For many of us, it started right here. The all mighty powerful 1/2 DIN EQ in the glove box or under the dash with all the tuning control and flexibility we could ever need. For many applications, this all still holds true to form.